jual plat astm a283 grade c

Distributor Plat Boiler ASTM A283 Gr C Krakatu Steel & Krakatau Posco

Plat ASTM A283 Grade C merupakan material yang diperuntukan untuk tekanan biasanya dipergunakan untuk kebutuhan Instalasi Boiler yang mena berhubungan dengan tekanan dan tempratur.

Brand : KS dan KP

Thickness : 6mm – 12mm

Dimensi : 5 Feet X 20 Feet dan 6 Feet x 20 Feet

Untuk informsi lebih lanjut mengenai product Knowledge dan Stock. Harap hubungi Customer Support

Plat ASTM A-516 Gr.70

Product: Pressure Vessels and Boilers Plate
Kategori: High Tensile Steel Plate
Grades : A-516 Gr.70
Standard: ASTM/ ASME
Place of Origin: Indonesia

Equivalents
ASTM A285| ASME SA285 | ASTM A537 | ASME SA537 | EN 10028 | BS 1501 | DIN 17155 | Cryogenic Steel

Characteristic

Adhitama steel provide high tensile carbon steel plate according to ASTM A516 Grade 70 and ASME SA516 Grade 70 for boiler and pressure vessel fabrication of the oil, gas and petrochemical industry.
ASTM A-516 standard is primarily used in welded pressure vessels where improved notch toughness is required. The steel plates allow four different strength levels 55, 60, 65 & 70 and the most common is grade 70. This grade is made to a fine grain particle size to meet the requirement of varied industry applications. ASTM A-516 Gr.70 steel plates are HIC tested.

Features:
Uniform surface
High tensile strength
Corrosion resistance
Sturdy construction
Temperature resistance

Availability
Thickness: 8 – 65 mm
Size: 1524 x 6096 mm or 5 x 20ft
1829 x 6096 mm or 6 x 20ft

Tabel Ukuran & Berat  Plat ASTM A-516 Gr.70

Product	Thickness (Inch)	Size (Feet)	Weight (Kg)
Plat A516 5mm	3/16″	5′ x 20′	347
Plat A516 6mm	1/4″	5′ x 20′	463
Plat A516 8mm	5/16″	5′ x 20′	579
Plat A516  10mm	3/8″	5′ x 20′	694
Plat A516 12 mm	1/2″	5′ x 20′	926
Plat A516 14 mm	9/16″	5′ x 20′	1042
Plat A516 16mm	5/8″	5′ x 20′	1158
Plat A516 19 mm	3/4″	5′ x 20′	1389
Plat A516 25 mm	1″	5′ x 20′	1852
Plat A516 38 mm	1.5″	5′ x 20′	2824
Plat A516 45 mm	1.75″	6′ x 20′	4012
Plat A516 50 mm	2″	6′ x 20′	4458
Plat A516 60 mm	2.375″	6′ x 20′	5351
Plat A516 65 mm	2.625″	6′ x 20′	5695

REPORT THIS AD

For plates < 40mm (thinner), normally supply as rolled. Plates supplied > 40mm (above) thick are normalised.
Thickness above 65mm indent 6 – 8 weeks with minimum order

Chemical Composition (%)

C	Si	Mn	P	S	Al	Cr
0.10-0.22	0.6	1.0-1.7	0.03	0.03	0.02	0.3
Cu	Ni	Mo	Nb	Ti	V
0.3	0.3	0.08	0.01	0.03	0.02

Mechanical Properties
Tensile strength (MPa) : 485-620
Yield strength (MPa) : 260
Elongation in 200mm (min)(%): 17
Elongation in 50mm (min) (%): 21
Thickness (max)(mm) : 205

Weldability
ASTM A-516/SA516 normalized products can be welded using a low-hydrogen electrode and Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW) or Submerged Arc Welding (SAW) processes. It is recommended that welding be conducted in accordance with the aplicable ASME/AWS codes.

Formability
Because the normalizing process results in a homogenous, fine-grained ferritic microstructure, plates produced by this process exhibit excellent formability.

Application:
Boilers and pressure vessel fabrication of the oil, gas and petrochemical industry.

Related Grade
ASTM A516 Gr.55 | ASTM A516 Gr.60 | ASTM A516 Gr.65 | ASTM A516 Gr.70 | ASME SA516 Gr.70

Jual plate astm A36

Plat A36/ ST37-2 DIN/ A283 Grade D/ S275JO EN/ BS 43A/ AISI1018/ SS400 JIS/ AS3678-250

Description
Plat kapal mild steel A36, yang juga dikenal sebagai SS400 JIS 3101, di ASME Kode Bagian II-A spesifikasi JIS dari pelat baja untuk konstruksi umum termasuk dalam kategori SA-36. Di JIS (Standar Industri Jepang) “SS” singkatan dari baja struktural (structural steel) dan grade 400 yang mirip dengan AISI 1018. Plat kapal mild steel A-36 adalah salah satu baja canai panas struktural yang paling umum digunakan. Tipikal material baja karbon khas, harganya relatif murah, sangat bagus di las dan di machining dan material baja SS400 dapat mengalami berbagai perlakuan panas.
Baja SS400 pelat umumnya disebut dengan plat mild steel (MS). Untuk plat ukuran 5 x 20kaki (feet) sering juga disebut dengan pelat kapal, karena banyak digunakan untuk industri perkapalan

Equivalents
ST 37-2 DIN 17100, ASTM A36, ASTM A283 Grade D, EN 10025-S275JO, BS4360-43A, AISI 1018, JIS G3101 SS400, AS3678-250,

Availability
Plate
Thickness: 1.2 mm – 100 mm
Size: Width x Length
4′ x 8′ (1219 x 2438mm),
5′ x 20′ (1524 x 6096mm),
6′ x 20′ (1828 x 6096mm)
Roundbar
Dia.8mm – 250mm Standar L=6M
Tabel Ukuran dan Berat Plat ASTM A-36

Product	Tebal (mm)	PxL (feet)	Berat (Kg)
Mild steel 4mm	4	4×8 =	93.32
Mild steel 4.5mm	4.5	4×8 =	105
Mild steel 4.8mm	4.8	4×8 =	112
Mild steel 5mm	5	4×8 =	117
Mild steel 5.8mm	5.8	4×8 =	135.32
Mild steel 6mm	6	4×8 =	140
Mild steel 8mm	8	4×8 =	187
Mild steel 9mm	9	4×8 =	210
Mild steel 10mm	10	4×8 =	233.3
Mild steel 11mm	11	4×8 =	256.62
Mild steel 12mm	12	4×8 =	280
Mild steel 13mm	13	4×8 =	303.3
Mild steel 14mm	14	4×8 =	326.62
Mild steel 15mm	15	4×8 =	350
Mild steel 16mm	16	4×8 =	373
Mild steel 18mm	18	4×8 =	420
Mild steel 19mm	19	4×8 =	443.3
Mild steel 20mm	20	4×8 =	467
Mild steel 21mm	21	4×8 =	490
Mild steel 22mm	22	4×8 =	513.3
Mild steel 24mm	24	4×8 =	560
Mild steel 25mm	25	4×8 =	583.3
Mild steel 28mm	28	4×8 =	653.24
Mild steel 30mm	30	4×8 =	700
Mild steel 31mm	31	4×8 =	723.3
Mild steel 32mm	32	4×8 =	747
Mild steel 38mm	38	4×8 =	887
Mild steel 40mm	40	4×8 =	933.2
Mild steel 42mm	42	4×8 =	980
Mild steel 45mm	45	4×8 =	1050
Mild steel 50mm	50	4×8 =	1167
Mild steel 65mm	65	4×8 =	1516.5
Mild steel 75mm	75	4×8 =	1750
Mild steel 80mm	80	4×8 =	1870
Mild steel 85mm	85	4×8 =	1983.1
Mild steel 90mm	90	4×8 =	2100
Mild steel 100mm	100	4×8 =	2333
Plat kapal 4.5mm	4.50	5” x 20″	328
Plat kapal 6mm	6.00	5” x 20″	438
Plat kapal 8mm	8.00	5” x 20″	583
Plat kapal 9mm	9.00	5” x 20″	656
Plat kapal 10mm	10.00	5” x 20″	729
Plat kapal 12mm	12.00	5” x 20″	876
Plat kapal 22mm	22.00	5” x 20″	1604
Plat kapal 16mm	16.00	5” x 20″	1167
Plat kapal 19mm	19.00	5” x 20″	1386
Plat kapal 25mm	25.00	5” x 20″	1822
Product	Thk (mm)	Sheet Size	Weight (Kg)
Marine Plate 4.5mm	4.50	6” x 20″	394
Marine Plate 6mm	6.00	6” x 20″	525
Marine Plate 8mm	8.00	6” x 20″	700
Marine Plate 9mm	9.00	6” x 20″	788
Marine Plate 10mm	10.00	6” x 20″	875
Marine Plate 12mm	12.00	6” x 20″	1050
Marine Plate 22mm	22.00	6” x 20″	1400
Marine Plate 16mm	16.00	6” x 20″	1664
Marine Plate 19mm	19.00	6” x 20″	1926
Marine Plate 25mm	25.00	6” x 20″	2188

Chemical Composition
As per JIS G 3101, Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Mechanical Properties
Density (kg/m3) : 7860
Young’s Modulus (GPa) : 190-210
Tensile Strength (MPa) : 400 – 510 MPa
Yield Strength (MPa) : 205-245 MPa
Poisson’s ratio : 0.26
Hardness,Brinell (HB): 160

Melting Point
Melting point of SS400 is 1430 Degree Celsius

Workability
Easy to Weld, Cut, Form and Machine

Applications
Base plates, Bridge, gussets, liners, road plates, trench covers, etc.